Mechanotechnics N4: Power transmitted by a belt drive

Belt drives · 6 marks · free worked example

Share with your class:WhatsAppFacebookX

Question

A pulley with a diameter of 400 mm rotates at 900 r/min. The tension in the tight side of the belt is 1.8 kN and in the slack side 0.6 kN. Calculate the power transmitted by the belt.

Given

D=400 mm=0.4 m\begin{aligned} D &= 400\ \text{mm} \\ &= 0.4\ \text{m} \end{aligned}
  • N=900 r/minN = 900\ \text{r/min}
T1=1.8 kN=1 800 N\begin{aligned} T_1 &= 1.8\ \text{kN} \\ &= 1\,800\ \text{N} \end{aligned}
T2=0.6 kN=600 N\begin{aligned} T_2 &= 0.6\ \text{kN} \\ &= 600\ \text{N} \end{aligned}

Solution, step by step

Belt speed:

v=πDN60=π×0.4×90060=18.85 m/s\begin{aligned} v &= \frac{\pi D N}{60} \\ &= \frac{\pi \times 0.4 \times 900}{60} \\ &= 18.85\ \text{m/s} \end{aligned}

Power transmitted:

P=(T1−T2) v=(1 800−600)×18.85=22 620 W=22.62 kW\begin{aligned} P &= (T_1 - T_2)\,v \\ &= (1\,800 - 600) \times 18.85 \\ &= 22\,620\ \text{W} \\ &= 22.62\ \text{kW} \end{aligned}

Answer: the belt transmits 22.62 kW.

Mistakes to avoid

  • Change the diameter to metres and the tensions to newtons before you substitute, otherwise the answer is out by a factor of 1 000.
  • The speed must be in m/s: divide by 60 to change r/min to r/s.
  • Marks are usually split: belt speed, power formula with substitution, answer with the unit.

Get every question of your own paper explained like this

Upload your Mechanotechnics N4 question paper and its memo. Get Good works out every question, checks the memo against the paper and lets you ask the AI tutor about any step.

More free worked examples

All worked examples →